- Lab water system
- Medical water system
- Industrial water system
|
|
With 7.0 inch touch screen system, 3 way water quality sensor, 2 way flow sensor for quantified dispensing, and 2 stage RO system, Center series ultrapure water system is top choice of high flux ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 45 to 90 liters/hour. It can produce 2nd stage RO water and ultrapure water. The 2nd stage RO water’s conductivity can stay 1-5μs/cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
|
Flow Schematic
Specifications
|
|
|
|
|
| Model |
Standard |
Eliminating endotoxin |
Low TOC |
Synthesizing |
| Center 45/60/90 |
Center 45/60/90F |
Center 45/60/90V |
Center45/60/90FV |
| Output -2nd stage RO water* |
45series-45 liters/hour, 60 series-60 liters/hour, 90 series-90 liters/hour |
| Output -ultrapure water |
Up to 2 liters/minute (when tank is full) |
| Ultrapure water quality |
? |
| Resistivity(25°C) |
18.2MΩ.cm |
| TOC* |
<10ppb |
<10ppb |
<3ppb |
<3ppb |
| Bacteria |
<0.01cfu/ml |
| Particle(>0.2μm) |
<1/ml |
| Endotoxin |
N/A |
<0.001Eu/ml |
N/A |
<0.001Eu/ml |
| RNases |
N/A |
<1pg/ml |
N/A |
<1pg/ml |
| DNases |
N/A |
<5pg/ml |
N/A |
<5pg/ml |
| RO water quality |
? |
| Conductivity - 1st stage RO water |
Feed water conductivity×5%* |
| Conductivity - 2nd stage RO water |
1-5&Micro;s/cm* |
| Feed water requirements |
Tap water, temperature:5-45°C,pressure:1.0-4.0Kgf/cm2 |
| Dimension and weight |
Length × Width × Height: 610×585×1580mm / Weight: about 75Kg |
| Electrical requirements |
AC110-240V, 50/60Hz |
| Power |
480W |
| Standard configuration |
Main body (Including 1 set of cartridge)+built-in 20 liters PE tank and 20 liters pressure tank |
Remarks:
*The value will be influenced by temperature and feed water’s quality.
Cartridges |
| Item no. |
Commodity |
Approximate replacement term /set |
| C-PP |
Pretreatment cartridge |
2-6 months |
| C-AK |
KDF+ granular active carbon mixed cartridge |
12 months |
| C-AC2 |
Active carbon block cartridge |
6 months |
| C-RO-200 |
200 GPD reverse osmosis membrane |
12-24 months |
| C-RO-300 |
300 GPD reverse osmosis membrane |
12-24 months |
| C-RO-400 |
400 GPD reverse osmosis membrane |
12-24 months |
| C-RO-500 |
500 GPD reverse osmosis membrane |
12-24 months |
| C-RO-600 |
600 GPD reverse osmosis membrane |
12-24 months |
| C-EDI-HX50 |
EDI module |
12-36 months |
| C-EDI-HX100 |
EDI module |
12-36 months |
| C-Decart1 |
High flux mixed bed resin cartridge |
35000 liters pure water |
| C-Pocart3 |
High flux ultrapure polishing resin cartridge |
35000 liters pure water |
| C-Pocart4 |
Ultrapure polishing resin cartridge |
5000 liters pure water |
| C-Uvlcart-14W |
(254&185)nm wavelength uv module |
-- |
| C-Uvlamp-14W |
(254&185)nm wavelength uv lamp |
9000 hours |
| C-Ufcart |
Eliminating endotoxin uf cartridge |
-- |
| C-Tefit |
0.2µm terminal filter |
-- |
|
